[Roadsters] FW: Emblem question/answer

[Matthew A. Smith]

Oops, forgot to add "the list" address to my reply... it's early.

-----Original Message-----
From: Matthew A. Smith [mailto:matthews517 at earthlink.net] 
Sent: Friday, January 18, 2008 8:03 AM
To: 'dave'
Subject: RE: [Roadsters] Emblem question/answer

From: Dave [mailto:daveandlindab at comcast.net]
"Even if the pins are not the same, grind them off the new emblem, and use
thin double stick tape.  Other method, if you can get to the back of the
fender or make a template, mark and epoxy new pins in the proper place."

Hi Dave, 
I like this idea. Going to go to the junk yard this weekend and see if I can
find any to experiment with.

Everyone,
Here's the reply I got from Troy Thacker at "Too Intense Restoration" (it
was stuck in my "suspect email" folder).
"Sorry the emblems in question will not fit they are very different from the
correct ones for the Roadster. I do offer the (3) emblems that are correct
for the Roadster. They are not listed on my web site but I do have them.
They sell for 138.95 for the set of (3) and they are Genuine Nissan / Datsun
parts."

Thanks for your suggestions, Listers!
Matt Smith