[Roadsters] screws non-ISO

[Keith0alan at aol.com]

In a message dated 1/4/2008 10:39:13 AM Pacific Standard Time,  
conner_a at comcast.net writes:

I have actually ordered this guy's carb screw-pack on ebay as well.   Should 
arrive any day now, I specified my car is a 68 so we'll see if the dome  
screws actually fit.  
 
Andy Conner
SRL 311-01633



If they don't, contact him. They have been very responsive to getting the  
correct screws delivered. Since the screws did not seem to have a hard  
switchover year, and carbs have been switched a lot, knowing what screw you have  when 
you order would be best. You can either measure with a metric thread pitch  
gauge or go to the hardware store and but one 5mm screw. The modern screw will  
be 5x.8. If your carb screws don't match you have the 5x.75. The 5x.75 are a 
bit  pricey as he is having them made. 
 
BTW, if anyone orders a set and replaces your old ugly original screws, I  
would love to have the old ones. I will still be refurbishing all the old screws 
 I can find.
 
keith "the slow carb guy" williams



**************Start the year off right.  Easy ways to stay in shape.     
http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489