[Roadsters] Question about Steering wheel lock

[Bubba]

Sometimes the steering wheel turns slightly after it locks, and the locking 
pin gets jammed.  Before taking anything apart, try turning the steering 
wheel both ways wit some effort.  Don't jerk it, just apply steady pressure. 
If this doesn't work, next is to jack up the front so there's no weight on 
the front wheels.  Try again.

Good luck
Bob Wisnlade
1966-1600 Missy
1967-1600 Bender

----- Original Message ----- 
From: "Chas Willis" <Fairlady at putermail.net>
To: "datsun-roadsters" <datsun-roadsters at autox.team.net>
Sent: Friday, January 04, 2008 10:02 AM
Subject: [Roadsters] Question about Steering wheel lock


>I have a 68 2000, the keys are stuck in the ignition the ignition will not
> turn and the steering wheel is locked.
>
> I looked at removing the ignition and the locking mechanisms from the 
> column
> but there are two odd type studs in the case that look as if they
>
> are meant to protect the mechanism from being removed by a thief.
>
> Any suggestions would be appreciated.
>
> Chas
> ________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as bubwin at mts.net
>
> Datsun-roadsters mailing list
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/datsun-roadsters