[British-cars] [Bulk] Re: SU H6 Carbs on an MG-TD

[anngene at bellsouth.net]

I agree it's a poorly conceived project for a street car but if he's got the 
money to spend he can bid on an extractor manifold I have on eBay 
(250837049396) right now that will do it for him.
Best regards,
Gene Gillam
Saucier, MS



--------------------------------------------------
From: <WSpohn4 at aol.com>
Sent: Friday, June 17, 2011 2:14 PM
To: <wbeech at flash.net>; <bill_beecher at flash.net>; <triumphs at autox.team.net>; 
<british-cars at autox.team.net>
Subject: [Bulk] Re: [British-cars] SU H6 Carbs on an MG-TD

> Poorly conceived project. That is way too much carb for that engine. 
> Tell
> him to forget about it.
>
> Bill
>
>
> In a message dated 6/17/2011 12:07:17 P.M. Pacific Daylight Time,
> wbeech at flash.net writes:
>
> Have a  friend asking about putting a set of H6 carbs on his '54 MG-TD,
> 1-3/4" down  to 1-1/4" .  Is there an adaptor/reducer that will allow him 
> to
> do  this?
> _______________________________________________
> British-cars at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/british-cars/anngene@bellsouth.net