[British-cars] Voltage Stabilizer for TR3

[Terry Cowan]

Bill, I don't recall any TR-3 using a Stabilizer, later cars yes early cars no. Terry

-----Original Message-----
>From: wbeech at flash.net
>Sent: May 7, 2010 1:53 PM
>To: triumphs at autox.team.net, british-cars at autox.team.net
>Subject: [British-cars] Voltage Stabilizer for TR3
>
>Hello List,
>
>Having some problems with erratic readings from my new sending unit recently
>acquired from BPNW.  I have checked everything to be sure the connections
>are tight, even ran an additional ground wire from the gauge to the dash
>panel.
>
>Still no improvement, so I wrote to BPNW and they say I should have a
>Voltage Stabilizer pn=148876D mounted behind the gauges.  I don't recall
>anything like this in any TR3 documentation.  When I look this part up on
>the BPNW web site it shows to be an MG part, but BPNW insists this is what I
>should have for the Triumph.
>
> 
>
>Has anyone installed one of these on a TR3?  
>
>http://www.bpnorthwest.com/.sc/ms/bdd/ee/9955/Voltage%20Stabilizer
><http://www.bpnorthwest.com/.sc/ms/bdd/ee/9955/Voltage%20Stabilizer> 
>
>
>Bill Beecher
>'58 TR-3A TS 30766 L aka "Tar Baby"
>www.triumphowners.com/1566
>"A Triumph is man's best friend, it always comes when it is called...of
>course, some times it is difficult to make it go"
>_______________________________________________
>British-cars at autox.team.net
>Donate: http://www.team.net/donate.html
>Suggested annual donation  $11.47
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: http://autox.team.net/mailman/options/british-cars/terry@toyshop-resto.com