[British-cars] Bearings

[Mark Mason]

Yup.  English sized bearings are pretty thin on the ground.  But, the
bearing shop also couldn't source 5/16 X 1/4 rollers, and those are
available for Triumph (motorcycle) clutches, so I'm hoping that 1/4 X
1/4 are available through non-standard channels as well.  (there are,
for example, even a number of metric tapered roller bearings for
relatively modern motorcycle headstocks that are not listed by the
bearing company that makes them, but are available through motorcycle
suppliers.)

Fred Talmadge <fredtal at industryinet.com> wrote:

> Mark,  Have you gone to your local bearing supply house?  
> 
> Fred
> 
> On Monday 25 June 2007 8:44 pm, Mark Mason wrote:
>
> > To help feed the flurry of traffic, does anyone know of a source
> > for 1/4" X 1/4" roller bearings?  Just the rollers.