[Bricklin] How to fasten the front wheel bearing

[John T. Blair]

At 05:46 PM 5/15/2016, sven koch wrote:

 >the 4 screws of the mounting plate for the front wheel.  Getting everything
 >together was not a big challenge, but now my question is how to 
tight/ adjust the
 >wheel bearing.

Sven,

Quoting from the Chilton's AMC manual,

"Place the hub assembly onto the spindle and install the inner 
lockring and outer bearing.  Install the wheel bearing nut and torque 
it to 50 Ft Lb, while turning the wheel back and forth to seat the 
bearings.  Back off the nut about 1/4 turn (90deg) max."

John


John T. Blair  WA4OHZ     email:  jblair1948 at cox.net
Va. Beach, Va                  Phone:  (757) 495-8229

           48 TR1800    48 #4 Midget    65 Morgan 4/4 Series V (B1106)
      75 Bricklin SV1 (#0887)    77 Spitfire    71 Saab Sonett III
                        65 Rambler Classic

Morgan:    www.team.net/www/morgan
Bricklin:  www.bricklin.org

If you can read this             - Thank a teacher!
If you are reading it in English - Thank a Vet!!

 From Dennis Prager - The American Trilogy:
      e pluribus Unum, "from many, one."
      In God We Trust
      Liberty - the  power  of  choosing,  thinking,  and  acting  for
                   oneself; freedom  from  control  or  restriction




---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus