[Bricklin] Rear hatch warp

[Scott Isensee]

Here is where John Lodge talks about not being able to flatten a warped
headlight cover.
http://www.team.net/mharc/archives/html/bricklin/2004-02/msg00009.html



 The same applies to the hatch. If you have an original acrylic hatch warping
is common, the fiberglas replacements that the vendors sell are less prone to
warping. I put a replacement hatch in about 25 years ago and it still looks
good.

Scott



-----Original Message-----
From: Brett Kelsey <brettd_k at email.com>
To: Bricklin <Bricklin at autox.team.net>
Sent: Wed, Apr 9, 2014 7:42 pm
Subject: [Bricklin] Rear hatch warp


The upper corners of the hatch have lost their contour and are proud of the
surrounding panel. Has anyone else had this problem? If so is there a fix
other
than a new hatch?
_______________________________________________
Bricklin at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/bricklin/isensee@aol.com