[Bricklin] Air pressure regulator

[Rick at High Tech Coatings]

If  it is leaking badly it is probably junk. The diaphragm may or may not be
available depending on what brand regulator you have, or the case itself may
be cracked. It is just a generic air pressure regulator, You can get one at
princess auto or about anyplace that sells air tools, compressors etc. the one
that's installed is usually 1/8" pipe thread  but most inexpensive ones are
1/4" pipe thread, so you may need to buy a couple of reducer bushings.



On 7/31/2013 9:38:09 PM, d.gillis at eastlink.ca wrote:
> My air pressure regulator on the air door control panel has started
> leaking badly. I read that there is a diaphragm that may have dried out.
> Any one have a part no. and manufacturer details. I will get it from the
> vendors if need be but was hoping to get it sooner.
>
> Thanks,
> Don
> #2792
>
> Sent from my iPad
> _______________________________________________
> Bricklin at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.
> net/mailman/options/bricklin/rick at hightechcoatings.com