[Bricklin] Accelerator cable clamp

[Rick at High Tech Coatings]

an edelbrock 8004 may work for you,it will take a bit of machining, drill a
hole, It is 5/16 thread, originally designed for a chrysler kick down
extension

On 4/11/2013 3:18:14 PM, John T. Blair (jblair1948 at cox.net) wrote:
> I'm looking for an accelerator cable clamp like this one:
>
> http://www.flickr.com/photos/john_t_blair/8640137849/in/photostream/
>
> Anyone know where I can get one?
>
> It's
> for my '65 Morgan with the Cortina engine and the Zenith 32VN carb.
>
> I think when the carb was manufactured and this clamp installed, the
> buggered the threads on the stud to act as a nyloc nut.  So when I had to
> take the nut off to transfer it to another carb.  the threads got pertty
chewed
> up.
>
> John
>
> John T. Blair  WA4OHZ     email:  jblair1948 at cox.net
> Va. Beach, Va                  Phone:  (757) 495-8229
>
> 48 TR1800    48 #4 Midget    65 Morgan 4/4 Series V (B1106)
> 75 Bricklin SV1 (#0887)    77 Spitfire    71 Saab Sonett III
> 65 Rambler Classic
>
> Morgan:    www.team.net/www/morgan
> Bricklin:  www.bricklin.org
>
> If you can read this             - Thank a teacher!
> If you are reading it in English - Thank a Vet!!
>
> From Dennis Prager - The American Trilogy:
> e pluribus Unum, "from many, one."
> In God We Trust
> Liberty - the  power  of  choosing,  thinking,  and  acting  for
> on