[Bricklin] Recommended care for air cylinders

[Rick at High Tech Coatings]

I usually use aw32 hydraulic oil and squirt some in the top port of each
cylinder each spring, the only issue I sometimes have is it sometimes works it
way back to the solenoid and makes then a bit sticky, I can usually fix that
by taking it apart and cleaning the solenoid



On 9/5/2011 4:15:34 PM, Greg Schroeder (gschroeder at comcast.net) wrote:
> I am getting to replace another bimba cylinder.  I have lightly
> lubricated
> them with ait tool oil, but they never seem to keep the seal from failing.
>
> Since these are not repariable I would like to try to take care of them
> so
> they would last for at least a couple of years between replacement.
>
> Greg 0036
> _______________________________________________
> Bricklin at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.
> net/mailman/options/bricklin/rick at hightechcoatings.com