[Bricklin] Air valve problem

[Scott Isensee]

 Thanks, Rick. I actually added some oil to mine when it was sticking assuming
that would make it slide easier. I'll try cleaning it.


Scott


-----Original Message-----
From: Rick at High Tech Coatings <rick at hightechcoatings.com>
To: bl <bricklin at autox.team.net>
Sent: Mon, Oct 3, 2011 5:18 pm
Subject: Re: [Bricklin] Air valve problem


my pass side one does the same, If there is some oil on the valve shaft it
binds and doesn't open, I have to take it apart a couple of times a year and
clean all the oil out of it then it is fine


On 10/3/2011 12:24:40 PM, Scott Isensee (isensee at aol.com) wrote:
> One of the valves in my air control box
> isn't working reliably. If I press the
> door up switch with the car not running, the valve for raising the
passenger
> door doesn't
> click and the door doesn't open. With the car running, the higher
> voltage causes the valve to work part of the time. I took the valve apart
and
> it looks fine. If I drain most of the pressure out of the air tank, then
the
> valve works every time. So it looks like that valve is having a hard time
> working when the system is at full pressure. The other 3 valves in the
control
> box are all working fine. Any suggestions what to do?
>
>
> Scott
> _______________________________________________
> Bricklin at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/bricklin/rick@hightechcoatings.com
_______________________________________________
Bricklin at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/bricklin/isensee@aol.com