[Bricklin] window channel to glass glue and door skin glue

[Greg Schroeder]

Larry,

There are a lot of different opinions on this subject.

For the window glass to the channel I ended up using 3M Windshield adhesive. 
I have also used it to hold on the black trim pieces on the car.

For the skin since I have had to remove two that were bonded an epoxy that 
was extremely hard to remove.  They also recommend and epoxy were the gun to 
apply it cost around $150.  I ended up using polyurethane.  This can expand 
and contract with the change in tempreture, but it is also fairly easy to 
remove if needed.

I have had no issues with either application.

Greg 0036