[Bricklin] Terry Tanner air headlight system

[Rick at High Tech Coatings]

it will probably be much cheaper and easier to change the vacuum hoses and the
front seal in the one actuator,  the seals are about $10 each from corvette
vendors, or you can get the kit which is the seal, boot and lock ring for
about $20
http://www.zip-corvette.com/ProductDetails/Kits/StaticKitDetails.aspx?KitItem
ID={86dc6b69-9822-437b-9f5f-973bc7e0a08f}&gid={7eee0585-4978-48c3-bb30-c0a1d7
180e8c}&GroupName=Headlight+Actuator&pname=68-82+Headlight+Actuator+Repair+Ki
t&Referer=&Alias=&ptct=SGR-SR&CTitle=&
On 1/22/2010 12:39:27 PM, pugsracer at comcast.net wrote:
> Hey fellows thanks for all the comments on the headlight air system. on my
> car
> it always does the "wink" on start up, but also after shut down, the one
> headlight always pops up and stays up until starting again. So I guess
> that is
> a vac issue. anyway this is an update I will consider if I get the car on
> the
> road this summer. Pugs 756