[Bricklin] Air Pump wire recommendataions

[Greg Schroeder]

John,

I did by the pressure switch from Viair I believe it is a 125 PSI, but it 
does not look like the one from the link.  My doors seem to work best with 
about 110 PSI or more in the tank.   I have some relays that I had purchased 
a while back so I can use one of those.

I plan on leaving the pump where it is behind the front bumper until I get 
this worked out.  I may leave it there since safe and reliable is what I am 
working for.

Since I have fixed the leaks my pump does not kick on that often, but I 
always turn it off when I am not using the car.  It seems to leak down below 
100 after a couple of days if the tank was full and the doors were not used.

Greg 0036