[Bricklin] Air Pump wire recommendataions

[Greg Schroeder]

I had replaced my original pump with a Viair 325.  I also installed an inline
fuse.  If the tank is empty and I try to pump it up I am blowing the fuse and
the wire is getting hot.  I feel I need to use a thicker wire with this pump
as compared to the other one since the amp draw appears to be higher.  I could
not find any information on Viair site, but found a install kit with a 12
gauge wire.  What would someone recommend for a replacement wire and inline
fuse amperage.

Greg 0036