[Bricklin] AMC Rod Bearings

[Greg Schroeder]

OK, I have all the pistons in and made one full cycle with the engine from 
TDC to TDC.  It is still tight, but at least I can move it.  I appreciate 
all the suggestions and assistance.  I have placed a few photos on my 
photobucket site on the engine rebuild during teardown and after back from 
the machine shop.  I will need to update with some current assembly photos 
when I get past this point.

http://s2.photobucket.com/albums/y5/play8or9/Engine%20Rebuild/?start=0

Greg 0036