[Bricklin] Distributor Position at TDC

[Dennis Gautreau]

All distributers point to the number one plug when you are setting the 
distributer on an engine. The number 1 cylinder should be at top dead center 
in order for this to work correctly. Below is a link showing the firing 
order and cylinder locations of the Windsor class engines if anyone wants it 
for reference.

http://www.302w.com/Firing-order.aspx



Hope this helps.. Dennis

----- Original Message ----- 
From: "D Walker" <treefrogno9 at webtv.net>
To: "Rick at High Tech Coatings" <rick at hightechcoatings.com>; "bl" 
<bricklin at autox.team.net>
Sent: Tuesday, July 21, 2009 6:37 AM
Subject: Re: [Bricklin] Distributor Position at TDC


> Looking at it from the front. The advance can should be somewere near 
> 5:00. Your no.1 will be the first plug wire location right of the front 
> cap mounting screw.
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> Bricklin at autox.team.net
> http://autox.team.net/mailman/listinfo/bricklin
>
> You are subscribed as drgautreau at comcast.net
>
> http://www.team.net/archive