[Bricklin] rubber vs poly.

[bricklin0095 at aol.com]

Johns right, the poly bushings have a tendency to squeak/groan loudly 
at times.. I tried them on the front sway bar and found that cutting an 
antifreeze jug and wrapping the plastic around the bar before sliding 
the bushing on was the only way to permanently quiet it..

One thing that I reccomend for any one replacing the motor mounts on 
the 74's is to drill a hole through the mount and install a 3/8 bolt. 
this will keep the mount from separating at the rubber while allowing 
the rubber to ablsorb the vibations.