[Bmcu] 1967 MGB Roadster

[-J]

My sympathies.  
I just finished a complete rebuild and upgrade of my brakes and bushings on my 70 BGT.  I replaced just about everything but the master cylinder.  I put on V8 EBC pads, drilled rotors and stainless hoses on it.  I think the whole thing ended up costing around $600-$700.  Most parts were sourced from Moss.

On the plus side, it now feels like a sportscar instead of a tractor.  ;-)
...and maybe I won't have to drive home from antelope island without brakes again.  :-)

I do have a brand new pair of roadster wheel cylinders.  Moss sent me the wrong ones.  I'd take $30 for both.  
I also have a gas cap for a newer model with the exterior flange for $12 if anyone else wants it.  It's new in the box.

-Jeff H

Sent from my DROID RAZR MAXX HD.

Mitch Hendricks <mitch at villagelightingcompany.com> wrote:

>Good afternoon,
>I recently purchased a 1967 MGB convertible. It has been sitting the last 10+ years. I was told it was running when put away but since then the brakes have semi locked up and it has deteriorated in many other ways. 
>
>Before I reach out to the various catalog companies for parts I thought I'd throw this out and see if anyone has any parts kicking around?
>
>Brakes - master, caliper and cylinders, rebuild parts
>Clutch - master and slave, rebuild parts
>Inner door and window cranks.
>Fuel pump - rebuild
>Batteries! - Twin 6V setup
>Battery trays.
>Any rear interior 
>Cap and rotor
>Seat covers
>Hub Caps
>
>Thank you all for your time!
>
>
>Thanks,
>Mitch
>801-674-0069
>_______________________________________________
>Bmcu at autox.team.net
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: http://autox.team.net/mailman/options/bmcu/dodahman_001@yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/bmcu/attachments/20130603/012d8ad1/attachment.html>