[Bmcu] Cracked Windshield Utah Safety Inspection Question

[Jon Zaremba]

Ha ha haa.... So you're saying "live with it", right Bill?

I'm fine with it for now just as long as it passes safety in August. 
If there is a length limit, then i was thinking of getting it 
inspected now before it spreads further.  It's not in my way any.  In 
fact, it is looking like it will circle my BMCU window decal.

Jon


Bill Robinson wrote:
> The permissibility of any crack is conversely proportional to the cost of a
> new windscreen. The more expensive the glass, the smaller the maximum
> permissible crack.
> B.
> 
> -----Original Message-----
> From: bmcu-bounces at autox.team.net [mailto:bmcu-bounces at autox.team.net] On
> Behalf Of Jeff Greenland
> Sent: Saturday, June 14, 2008 9:17 AM
> To: Jon Zaremba
> Cc: bmcu at autox.team.net
> Subject: Re: [Bmcu] Cracked Windshield Utah Safety Inspection Question
> 
> I believe it is no longer than 6 inches anywhere on the windshield, and 
> no longer than 2 inches directly in sight of the driver.
> 
> Or something similar to that anyway...
> 
> Jeff
> 
> 
> Jon Zaremba wrote:
>> Hi All,
>>
>> Somehow my windshield has developed a crack near the bottom right 
>> corner of the passenger's side moving upwards towards the top.  It 
>> appears to be spreading further little by little.
>>
>> What is the maximum length of a crack to pass safety inspection here 
>> in Utah?
>>
>> Thanks!,
>> Jon Zaremba
>> 79 B
>> _______________________________________________
>> Bmcu mailing list
>> Bmcu at autox.team.net
>> http://autox.team.net/mailman/listinfo/bmcu
> _______________________________________________
> Bmcu mailing list
> Bmcu at autox.team.net
> http://autox.team.net/mailman/listinfo/bmcu