[Bmcu] [Fwd: MG part needed]

[Mark J. Bradakis]

For some reason this was sent to me rather than bmcu at autox.team.net

mjb.
-----


-------- Original Message --------
Subject: 	MG part needed
Date: 	Thu, 10 Jan 2008 11:02:45 EST
From: 	Rfdotson at aol.com

	



 
Hi all:
 
I am in need of the small copper or brass "clip" that is part of the 
wire attachment to the back of an electronic MGB positive ground 
tachometer. It is approximately 1/4 inch wide, about 5/8th inch long and 
can be described as a 5/8 X 1/4 X 1/4 rectangle with one long side 
missing. It will have a hole in the center of the remaining long side.
 
Roger Dotson
801-361-3508



------------------------------------------------------------------------
Start the year off right. Easy ways to stay in shape 
<http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489> 
in the new year.