[Bmcu] (no subject)

[mailnpgcable.com]

Low beams are either out or circuit to them is out
Can you try putting 12V right to the back of the low beam plug?
Or checking with a meter if you are getting Volts to the end of the Low Beam 
Plug
Disclaimer

I would check mine like that if I had one

But that may not be the best idea

Gordon
Bullhead City

PS Still looking for an affortable MG MG Midget,  Sprite


----- Original Message ----- 
From: "layne taggart" <layne.t at hotmail.com>
To: <Bmcu at autox.team.net>
Sent: Sunday, November 25, 2007 12:06 PM
Subject: [Bmcu] (no subject)


> Good afternoon. I hope everyone had a nice Thanksgiving.  Does anybody 
> know
> why I would have no low beam on my headlights, but when the foot switch is
> depressed, the hi beams come on?  Ned to get this fixed before it will 
> pass
> inspection .  Help!!!!!  Thanks, Layne, '66MGB
> _______________________________________________
> Bmcu mailing list
> Bmcu at autox.team.net
> http://autox.team.net/mailman/listinfo/bmcu