From bill_beecher at flash.net Sat Nov 3 10:55:46 2007 From: bill_beecher at flash.net (bill beecher) Date: Sat, 3 Nov 2007 11:55:46 -0600 Subject: [Bmcu] Mike Bailey's Message-ID: <20071103185400.B4DE71879E2@autox.team.net> Tried to call the number I have for Bailey's Garage in Murray but no answer and and no answering machine. Is this the right number: 801-268-1162 ? Thx, Bill No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.503 / Virus Database: 269.15.20/1107 - Release Date: 11/3/2007 11:22 AM From mark at bradakis.com Sat Nov 3 12:10:26 2007 From: mark at bradakis.com (Mark J. Bradakis) Date: Sat, 03 Nov 2007 12:10:26 -0700 Subject: [Bmcu] Mike Bailey's In-Reply-To: <20071103185400.B4DE71879E2@autox.team.net> References: <20071103185400.B4DE71879E2@autox.team.net> Message-ID: <472CC7A2.1080004@bradakis.com> Nope, that's not right. Contact info at http://baileysautomotive.com Gee, you'd think by now I'd remember the phone number! mjb. From wbeech at flash.net Sat Nov 3 11:20:29 2007 From: wbeech at flash.net (wbeech) Date: Sat, 3 Nov 2007 12:20:29 -0600 Subject: [Bmcu] Mike Bailey's In-Reply-To: <472CC7A2.1080004@bradakis.com> Message-ID: <20071103191843.A391C187A53@autox.team.net> Thanks Mark, I thought we had a link on the BMCU website but I could not find it. B -----Original Message----- From: bmcu-bounces at autox.team.net [mailto:bmcu-bounces at autox.team.net] On Behalf Of Mark J. Bradakis Sent: Saturday, November 03, 2007 1:10 PM To: bmcu at autox.team.net Subject: Re: [Bmcu] Mike Bailey's Nope, that's not right. Contact info at http://baileysautomotive.com Gee, you'd think by now I'd remember the phone number! mjb. _______________________________________________ Bmcu mailing list Bmcu at autox.team.net http://autox.team.net/mailman/listinfo/bmcu No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.503 / Virus Database: 269.15.20/1107 - Release Date: 11/3/2007 11:22 AM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.503 / Virus Database: 269.15.20/1107 - Release Date: 11/3/2007 11:22 AM From gary at cs.utah.edu Wed Nov 7 11:36:32 2007 From: gary at cs.utah.edu (Gary Lindstrom) Date: Wed, 07 Nov 2007 11:36:32 -0700 Subject: [Bmcu] nov newsletter is out Message-ID: <473205B0.8040307@cs.utah.edu> See http://www.britishmotorclub.org/news/2007/nov07.pdf Enjoy, --Gary From eastoncp at yahoo.com Wed Nov 7 16:50:51 2007 From: eastoncp at yahoo.com (Charles Easton) Date: Wed, 7 Nov 2007 15:50:51 -0800 (PST) Subject: [Bmcu] TR6 In-Reply-To: <473205B0.8040307@cs.utah.edu> Message-ID: <421440.6728.qm@web35304.mail.mud.yahoo.com> Howdy everyone, I'm excited to announce the newest addition to the Easton family, our 1969 TR6. This is a car I've had my eye on since I was 10 years old when my father first brought it to my attention, so having one sitting in my garage is still a bit surreal. I drove it from Denver last weekend via I-80 at 75 to 80 miles an hour the whole way. I consider myself quite lucky that I made it without any issues. So hopefully, if the weather permits, I'll be able to drive it to Hill AFB next weekend. I'm getting as much out of it as possible now, so thank goodness for high pressure (though I could do without the haze). Chuck PS - the MG is still available, but Gary, would you mind removing the line about the TR6 in the autojumble? Thanks! Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From spitfiresrule at msn.com Fri Nov 9 22:30:08 2007 From: spitfiresrule at msn.com (MITCH D JOHNSON) Date: Fri, 9 Nov 2007 22:30:08 -0700 Subject: [Bmcu] An added possibility for our Museum tour day Message-ID: Folks, Our friend and loyal member Paul Jaroch has added another possibility for a lunch facility after our Aerospace Museum tour. "Burrito Grande" in West Roy. Paul says this is an amazing experience for folks who cannot find true Mexican cuisine. It is just down the road from where we will be and I'm told it is very accommodating and friendly along with a good supply of cold cervasas (I hope that is spelled correctly). So, as planned we will take a vote at the museum to go from there. As always, thank you for your support. Mitch From stradi at xmission.com Tue Nov 13 10:38:26 2007 From: stradi at xmission.com (Michael Scoggins) Date: Tue, 13 Nov 2007 10:38:26 -0700 Subject: [Bmcu] help needed Message-ID: <4743EE2E32D64649BBC33E8505C394B6@MScogginsPC> Fellow car nuts? I need a few strong bodies to help me put my TR3 tub back on its frame. I've got the frame finished and need to start welding in floor pans and the like. The tub is in my back yard and needs to be moved around to the front of my home. I was hoping that after this weekends event up at Hill, the guys that live in Salt Lake could stop by my home in Bountiful on their way home and help me move it. It won't take more than ten minutes and five people can move it easily. Let me know if your interested. Michael Scoggins 1448 N 100 W Bountiful UT 84010 801 232 3186 c stradi at xmission.com From billr at redwoodmusic.com Tue Nov 13 22:17:39 2007 From: billr at redwoodmusic.com (Bill Robinson) Date: Tue, 13 Nov 2007 21:17:39 -0800 Subject: [Bmcu] help needed In-Reply-To: <4743EE2E32D64649BBC33E8505C394B6@MScogginsPC> Message-ID: <00d001c8267d$adcd75b0$6800a8c0@HOME> Michael, It was a pleasure to meet you in Laughlin. I'll be in UT in February. Let me know if you still need the help! Cheers, B. -----Original Message----- From: bmcu-bounces at autox.team.net [mailto:bmcu-bounces at autox.team.net] On Behalf Of Michael Scoggins Sent: Tuesday, November 13, 2007 9:38 AM To: BCMU Subject: [Bmcu] help needed Fellow car nuts? I need a few strong bodies to help me put my TR3 tub back on its frame. I've got the frame finished and need to start welding in floor pans and the like. The tub is in my back yard and needs to be moved around to the front of my home. I was hoping that after this weekends event up at Hill, the guys that live in Salt Lake could stop by my home in Bountiful on their way home and help me move it. It won't take more than ten minutes and five people can move it easily. Let me know if your interested. Michael Scoggins 1448 N 100 W Bountiful UT 84010 801 232 3186 c stradi at xmission.com _______________________________________________ Bmcu mailing list Bmcu at autox.team.net http://autox.team.net/mailman/listinfo/bmcu From gary at cs.utah.edu Thu Nov 15 08:36:18 2007 From: gary at cs.utah.edu (Gary Lindstrom) Date: Thu, 15 Nov 2007 08:36:18 -0700 Subject: [Bmcu] reminder: Hill Aerospace Museum tour this Saturday Message-ID: <473C6772.3020401@cs.utah.edu> Tech Session November 17, 2007 Traditionally we schedule a Tech session during November since driving weather has usually left us for the year. Unfortunately we have not been able to arrange a suitable venue for us to increase our knowledge of automobile technology. So, we are going to visit a place to learn more about aerodynamics and speed! The Hill AFB Aerospace Museum. To learn more about the museum itself log onto: http://www.hill.af.mil/library/museum/index.asp. Afterwards we can lunch at MacCools in Layton or if they are too busy there is a Roosters right across the street. To get there just be on I-15 take the Roy city exit and head east, you can't miss it. Meet us there at 10:00 AM and we'll get started.  Mitch Johnson From kandmcowan at earthlink.net Sun Nov 18 12:02:45 2007 From: kandmcowan at earthlink.net (Kevin Cowan) Date: Sun, 18 Nov 2007 11:02:45 -0800 Subject: [Bmcu] need an engine hoist Message-ID: <380-220071101819245665@earthlink.net> Yep, the 100M has to come out of the car and go back to NAPA in Portland. Does anyone have an engine hoist I can borrow for a few days around the end of November? I also need a crate or pallet to strap it to and a recommended shipper to get it to PDX. Thanks, Kevin From layne.t at hotmail.com Sun Nov 18 14:57:34 2007 From: layne.t at hotmail.com (layne taggart) Date: Sun, 18 Nov 2007 14:57:34 -0700 Subject: [Bmcu] '66 MGB Message-ID: Hello fellow members, my '66 MGB is in need of some very minor body work. The driver side door seems to have sagged making a clean closure difficult. Where would be the best place to have such a repair done? There is also a very good possibility that it will be for sale, as I am considering a '71 TR6 in Oregon. I can send anyone interested some pictures or you may certainly come by to see it. I can even meet you somewhere if interested. I drove it on the Trappers Loop Run and in the Miners Day Parade. British Racing Green, it does have a hard top, soft top , and tonneau cover. Original made in England minni lite wheels, with overdrive. Other than the door and a couple small dings, it's really nice. Call in the evenings, 523-2572, or call my cell, 201-0851 if interested.. If I don't sell it here, I'll take it to Oregon the week end of Dec. 1. Thanks, Layne Taggart. From layne.t at hotmail.com Sun Nov 25 13:06:16 2007 From: layne.t at hotmail.com (layne taggart) Date: Sun, 25 Nov 2007 13:06:16 -0700 Subject: [Bmcu] (no subject) Message-ID: Good afternoon. I hope everyone had a nice Thanksgiving. Does anybody know why I would have no low beam on my headlights, but when the foot switch is depressed, the hi beams come on? Ned to get this fixed before it will pass inspection . Help!!!!! Thanks, Layne, '66MGB From gordonb at npgcable.com Sun Nov 25 14:57:01 2007 From: gordonb at npgcable.com (mailnpgcable.com) Date: Sun, 25 Nov 2007 13:57:01 -0800 Subject: [Bmcu] (no subject) References: Message-ID: <010801c82fae$1bf894f0$675c7918@GordonsLapTop> Low beams are either out or circuit to them is out Can you try putting 12V right to the back of the low beam plug? Or checking with a meter if you are getting Volts to the end of the Low Beam Plug Disclaimer I would check mine like that if I had one But that may not be the best idea Gordon Bullhead City PS Still looking for an affortable MG MG Midget, Sprite ----- Original Message ----- From: "layne taggart" To: Sent: Sunday, November 25, 2007 12:06 PM Subject: [Bmcu] (no subject) > Good afternoon. I hope everyone had a nice Thanksgiving. Does anybody > know > why I would have no low beam on my headlights, but when the foot switch is > depressed, the hi beams come on? Ned to get this fixed before it will > pass > inspection . Help!!!!! Thanks, Layne, '66MGB > _______________________________________________ > Bmcu mailing list > Bmcu at autox.team.net > http://autox.team.net/mailman/listinfo/bmcu From wbeech at flash.net Sun Nov 25 16:34:24 2007 From: wbeech at flash.net (wbeech) Date: Sun, 25 Nov 2007 16:34:24 -0700 Subject: [Bmcu] (no subject) In-Reply-To: <010801c82fae$1bf894f0$675c7918@GordonsLapTop> Message-ID: <20071125233445.ED29C1879BD@autox.team.net> Could be as simple as a loose wire at the dimmer switch. Bill -----Original Message----- From: bmcu-bounces at autox.team.net [mailto:bmcu-bounces at autox.team.net] On Behalf Of mailnpgcable.com Sent: Sunday, November 25, 2007 2:57 PM To: layne taggart; Bmcu at autox.team.net Subject: Re: [Bmcu] (no subject) Low beams are either out or circuit to them is out Can you try putting 12V right to the back of the low beam plug? Or checking with a meter if you are getting Volts to the end of the Low Beam Plug Disclaimer I would check mine like that if I had one But that may not be the best idea Gordon Bullhead City PS Still looking for an affortable MG MG Midget, Sprite ----- Original Message ----- From: "layne taggart" To: Sent: Sunday, November 25, 2007 12:06 PM Subject: [Bmcu] (no subject) > Good afternoon. I hope everyone had a nice Thanksgiving. Does anybody > know > why I would have no low beam on my headlights, but when the foot switch is > depressed, the hi beams come on? Ned to get this fixed before it will > pass > inspection . Help!!!!! Thanks, Layne, '66MGB > _______________________________________________ > Bmcu mailing list > Bmcu at autox.team.net > http://autox.team.net/mailman/listinfo/bmcu _______________________________________________ Bmcu mailing list Bmcu at autox.team.net http://autox.team.net/mailman/listinfo/bmcu No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.503 / Virus Database: 269.16.7/1151 - Release Date: 11/25/2007 4:24 PM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.503 / Virus Database: 269.16.7/1151 - Release Date: 11/25/2007 4:24 PM From ron.christensen at wsapr.com Mon Nov 26 09:07:50 2007 From: ron.christensen at wsapr.com (Ron Christensen) Date: Mon, 26 Nov 2007 09:07:50 -0700 Subject: [Bmcu] (no subject) In-Reply-To: References: Message-ID: <002d01c83046$7e79bad0$1800a8c0@WSAPR.local> You have an MGB with Lucas Electrics . . . Enough said! -----Original Message----- From: bmcu-bounces at autox.team.net [mailto:bmcu-bounces at autox.team.net] On Behalf Of layne taggart Sent: Sunday, November 25, 2007 1:06 PM To: Bmcu at autox.team.net Subject: [Bmcu] (no subject) Good afternoon. I hope everyone had a nice Thanksgiving. Does anybody know why I would have no low beam on my headlights, but when the foot switch is depressed, the hi beams come on? Ned to get this fixed before it will pass inspection . Help!!!!! Thanks, Layne, '66MGB _______________________________________________ Bmcu mailing list Bmcu at autox.team.net http://autox.team.net/mailman/listinfo/bmcu From ron.christensen at wsapr.com Tue Nov 27 12:52:45 2007 From: ron.christensen at wsapr.com (Ron Christensen) Date: Tue, 27 Nov 2007 12:52:45 -0700 Subject: [Bmcu] (no subject) In-Reply-To: References: Message-ID: <000d01c8312f$14418000$1800a8c0@WSAPR.local> Another comment on the headlight problem from a BMC expert in L.A.: Did the MGB EVER have working headlights? Maybe his car was supplied without that option from new. Like it says on the Joseph Lucas parts boxes; " A Gentleman Does Not Drive Around After Dark" -----Original Message----- From: bmcu-bounces at autox.team.net [mailto:bmcu-bounces at autox.team.net] On Behalf Of layne taggart Sent: Sunday, November 25, 2007 1:06 PM To: Bmcu at autox.team.net Subject: [Bmcu] (no subject) Good afternoon. I hope everyone had a nice Thanksgiving. Does anybody know why I would have no low beam on my headlights, but when the foot switch is depressed, the hi beams come on? Ned to get this fixed before it will pass inspection . Help!!!!! Thanks, Layne, '66MGB _______________________________________________ Bmcu mailing list Bmcu at autox.team.net http://autox.team.net/mailman/listinfo/bmcu From mark at bradakis.com Tue Nov 27 23:48:17 2007 From: mark at bradakis.com (Mark J. Bradakis) Date: Tue, 27 Nov 2007 23:48:17 -0700 Subject: [Bmcu] headlights In-Reply-To: <000d01c8312f$14418000$1800a8c0@WSAPR.local> References: <000d01c8312f$14418000$1800a8c0@WSAPR.local> Message-ID: <474D0F31.8010709@bradakis.com> Being a Triumph guy, I tend to avoid memorizing details of lesser cars ;-) I can't remember if the dimmer switch has individual connectors for the wires or a plastic plug. If it is individual wires you can switch them around to see what happens. If the high beams come on with the switch in one position, then you swap wires and the low beams come on, then you know the low beam circuit is okay and the likely culprit is the switch. Tracking down electrical stuff can be frustrating. Bad grounds are one of the primary causes of wiring problems of the cars I've worked on, and they aren't always obvious. You know, if I had a dollar for every time I've heard that antediluvian Lucas refrigerator joke, I could easily buy this car: http://forums.utahscca.com/showthread.php?t=4815 On another note, over the last few weks I've been pretty bad at responding to emails regarding various parts and services and such. I'll work on getting out replies over the next day or two. mjb. From Richard.Neilson at ATK.com Wed Nov 28 07:33:19 2007 From: Richard.Neilson at ATK.com (Neilson, Richard) Date: Wed, 28 Nov 2007 07:33:19 -0700 Subject: [Bmcu] MGB Transmissions Message-ID: <5B1009562CA69A41A9FF7460AB401D6102658AAB@ut40se02.atk.com> I have a '67 MGB with a non OD transmission. I'd like it to be more highway friendly. I'm not a slave to originality, so a five speed conversion is something I'm considering. Is there an opinion out there on this conversion versus installing an OD transmission. Thanks, Richard From kandmcowan at earthlink.net Wed Nov 28 09:39:40 2007 From: kandmcowan at earthlink.net (kandmcowan at earthlink.net) Date: Wed, 28 Nov 2007 09:39:40 -0700 (GMT-07:00) Subject: [Bmcu] need a tool for removing the engine Message-ID: <29682989.1196267980308.JavaMail.root@elwamui-cypress.atl.sa.earthlink.net> All, I'm going to be pulling the engine on me Healey today or tomorrow and I'd like to have that tool (I don't know what its called) for changing the angle when the engine is hooked up to the hoist. If you have one you can spare, email me or call my home at 277-3623. Thank, Kevin From ron.christensen at wsapr.com Wed Nov 28 11:06:10 2007 From: ron.christensen at wsapr.com (Ron Christensen) Date: Wed, 28 Nov 2007 11:06:10 -0700 Subject: [Bmcu] need a tool for removing the engine In-Reply-To: <29682989.1196267980308.JavaMail.root@elwamui-cypress.atl.sa.earthlink.net> References: <29682989.1196267980308.JavaMail.root@elwamui-cypress.atl.sa.earthlink.net> Message-ID: <003101c831e9$5af3b080$1800a8c0@WSAPR.local> The angle of the dangle tool is BMC part number 0069 and can be purchased at the Blue Boutique. -----Original Message----- From: bmcu-bounces at autox.team.net [mailto:bmcu-bounces at autox.team.net] On Behalf Of kandmcowan at earthlink.net Sent: Wednesday, November 28, 2007 9:40 AM To: bmcu at autox.team.net Subject: [Bmcu] need a tool for removing the engine All, I'm going to be pulling the engine on me Healey today or tomorrow and I'd like to have that tool (I don't know what its called) for changing the angle when the engine is hooked up to the hoist. If you have one you can spare, email me or call my home at 277-3623. Thank, Kevin _______________________________________________ Bmcu mailing list Bmcu at autox.team.net http://autox.team.net/mailman/listinfo/bmcu From ron.christensen at wsapr.com Wed Nov 28 11:11:59 2007 From: ron.christensen at wsapr.com (Ron Christensen) Date: Wed, 28 Nov 2007 11:11:59 -0700 Subject: [Bmcu] MGB Transmissions In-Reply-To: <5B1009562CA69A41A9FF7460AB401D6102658AAB@ut40se02.atk.com> References: <5B1009562CA69A41A9FF7460AB401D6102658AAB@ut40se02.atk.com> Message-ID: <003401c831ea$2b858ca0$1800a8c0@WSAPR.local> I have always found my BMC cars to be most "highway friendly" when they are resting peacefully on a trailer towed behind my van. That way they have never failed to arrive at their intended destination. -----Original Message----- From: bmcu-bounces at autox.team.net [mailto:bmcu-bounces at autox.team.net] On Behalf Of Neilson, Richard Sent: Wednesday, November 28, 2007 7:33 AM To: bmcu at autox.team.net Subject: [Bmcu] MGB Transmissions I have a '67 MGB with a non OD transmission. I'd like it to be more highway friendly. I'm not a slave to originality, so a five speed conversion is something I'm considering. Is there an opinion out there on this conversion versus installing an OD transmission. Thanks, Richard _______________________________________________ Bmcu mailing list Bmcu at autox.team.net http://autox.team.net/mailman/listinfo/bmcu From eastoncp at yahoo.com Wed Nov 28 11:10:21 2007 From: eastoncp at yahoo.com (Charles Easton) Date: Wed, 28 Nov 2007 10:10:21 -0800 (PST) Subject: [Bmcu] Modern vs. Vintage Hill Climb In-Reply-To: <003401c831ea$2b858ca0$1800a8c0@WSAPR.local> Message-ID: <656009.28318.qm@web35307.mail.mud.yahoo.com> This should make all of us proud (hopefully you have speakers and a good internet connection). http://youtube.com/watch?v=4-DGMrLGnLg&feature=related Chuck Easton ('69 TR6, '70 MG BGT) --------------------------------- Get easy, one-click access to your favorites. Make Yahoo! your homepage. From Evan.Beuttenmuller at disney.com Wed Nov 28 11:57:57 2007 From: Evan.Beuttenmuller at disney.com (Beuttenmuller, Evan) Date: Wed, 28 Nov 2007 18:57:57 +0000 Subject: [Bmcu] 74 MGB wiring diagram In-Reply-To: <003401c831ea$2b858ca0$1800a8c0@WSAPR.local> Message-ID: Hey Guys, I'm having some problems with my tail lights. The brake lights work fine but the passenger side back running lights are out along with the windshield wipers. Can anyone direct me to a wiring diagram for a 74 MGB? Thanks, Evan From chrisjones_67 at msn.com Wed Nov 28 13:29:07 2007 From: chrisjones_67 at msn.com (Chris Jones) Date: Wed, 28 Nov 2007 13:29:07 -0700 Subject: [Bmcu] 74 MGB wiring diagram In-Reply-To: References: <003401c831ea$2b858ca0$1800a8c0@WSAPR.local> Message-ID: You might try this web site, as it has a world of information on trouble shooting as well as simplified schematics for each of the circuits. good luck, I'll bet part of the problem is in corroded ground connections. http://www.mgb-stuff.org.uk/electricstext1.htm > Date: Wed, 28 Nov 2007 18:57:57 +0000 > From: Evan.Beuttenmuller at disney.com > To: bmcu at autox.team.net > Subject: [Bmcu] 74 MGB wiring diagram > > Hey Guys, > > I'm having some problems with my tail lights. The brake lights work > fine but the passenger side back running lights are out along with the > windshield wipers. Can anyone direct me to a wiring diagram for a 74 > MGB? > > Thanks, Evan > _______________________________________________ > Bmcu mailing list > Bmcu at autox.team.net > http://autox.team.net/mailman/listinfo/bmcu From ron.christensen at wsapr.com Wed Nov 28 16:49:08 2007 From: ron.christensen at wsapr.com (Ron Christensen) Date: Wed, 28 Nov 2007 16:49:08 -0700 Subject: [Bmcu] 74 MGB wiring diagram In-Reply-To: References: <003401c831ea$2b858ca0$1800a8c0@WSAPR.local> Message-ID: <008201c83219$44bb35b0$1800a8c0@WSAPR.local> There is a pretty nice diagram on the wall of a cave just outside of Taos, New Mexico. Or use the section of roadmap showing the junction of the M1 and A323 just north of Brighton, West Sussex. Of course your MGB must be facing due north at the time (GMT). -----Original Message----- From: bmcu-bounces at autox.team.net [mailto:bmcu-bounces at autox.team.net] On Behalf Of Beuttenmuller, Evan Sent: Wednesday, November 28, 2007 11:58 AM To: bmcu at autox.team.net Subject: [Bmcu] 74 MGB wiring diagram Hey Guys, I'm having some problems with my tail lights. The brake lights work fine but the passenger side back running lights are out along with the windshield wipers. Can anyone direct me to a wiring diagram for a 74 MGB? Thanks, Evan _______________________________________________ Bmcu mailing list Bmcu at autox.team.net http://autox.team.net/mailman/listinfo/bmcu From kandmcowan at earthlink.net Wed Nov 28 19:20:03 2007 From: kandmcowan at earthlink.net (Kevin Cowan) Date: Wed, 28 Nov 2007 18:20:03 -0800 Subject: [Bmcu] 74 MGB wiring diagram Message-ID: <380-22007114292203535@earthlink.net> Ron, this is two usefull suggestions you offered today. Got any ideas on how to use the block email function? Kevin > [Original Message] > From: Ron Christensen > To: Beuttenmuller, Evan ; > Date: 11/28/2007 3:36:56 PM > Subject: Re: [Bmcu] 74 MGB wiring diagram > > There is a pretty nice diagram on the wall of a cave just outside of Taos, > New Mexico. Or use the section of roadmap showing the junction of the M1 and > A323 just north of Brighton, West Sussex. Of course your MGB must be facing > due north at the time (GMT). > > > -----Original Message----- > From: bmcu-bounces at autox.team.net [mailto:bmcu-bounces at autox.team.net] On > Behalf Of Beuttenmuller, Evan > Sent: Wednesday, November 28, 2007 11:58 AM > To: bmcu at autox.team.net > Subject: [Bmcu] 74 MGB wiring diagram > > Hey Guys, > > I'm having some problems with my tail lights. The brake lights work fine > but the passenger side back running lights are out along with the windshield > wipers. Can anyone direct me to a wiring diagram for a 74 MGB? > > Thanks, Evan > _______________________________________________ > Bmcu mailing list > Bmcu at autox.team.net > http://autox.team.net/mailman/listinfo/bmcu > _______________________________________________ > Bmcu mailing list > Bmcu at autox.team.net > http://autox.team.net/mailman/listinfo/bmcu