[Alpines] Valve spring specs.

[Jim Stone]

Frank: this list doesn’t get much use anymore; it has mostly been replaced by the SAOCA and TEAE forums.  I did look on the SAOCA forum and found a couple of discussions, two recent and one old, that I think may help you.  In particular, the first discussion is probably the most useful.

http://forum.sunbeamalpine.org/index.php?threads/terrys-valve-spring-catalog.26386/#post-180708 <http://forum.sunbeamalpine.org/index.php?threads/terrys-valve-spring-catalog.26386/#post-180708>
http://forum.sunbeamalpine.org/index.php?threads/source-for-new-valve-springs-for-series-5-1725cc-head.26330/#post-180329 <http://forum.sunbeamalpine.org/index.php?threads/source-for-new-valve-springs-for-series-5-1725cc-head.26330/#post-180329>
http://forum.sunbeamalpine.org/index.php?threads/valve-spring-question.14866/ <http://forum.sunbeamalpine.org/index.php?threads/valve-spring-question.14866/>

Good luck,
Jim Stone

> On Mar 27, 2018, at 2:10 PM, Frank Soikowski via Alpines <alpines at autox.team.net> wrote:
> 
> I am trying to find specifications for valve springs for 1725 alpine head. Factory manual gives only the fitted length which is the same for all series.  I have been advised that series I thru IV springs are not interchangeable with the 1725 springs. Thanks for any help.
> 
> Frank Soikowski
> 
> ** alpines at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Unsubscribe/Manage: http://autox.team.net/mailman/options/alpines/1789alpine@gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/alpines/attachments/20180327/51ead25c/attachment.html>