[Alpines] tach wiring

[jacranwell at aol.com]

Bill,

If it is standard Alpine, it should loop, unbroken between the dizzy and the
coil, and pass through a brass attachment att he rear of the Tach. The other
wires are just for the light. I'm not sure what adaptor you would need for
electronic ignition, but would be interested to know, as I've fitted
electronic to my E-Type, and the tach is now all over the place.

Julian.



-----Original Message-----
From: Bill Mounce <bmounce at rcn.com>
To: alpines <alpines at autox.team.net>
Sent: Wed, 14 Dec 2011 15:12
Subject: [Alpines] tach wiring


Hello all,

I am finally wiring my tachometer, and have the correct wire from my MSD
lectronic ignition (with tach adapter), ready to run up to the tach and
hrough the hole in the back of it.  Once I come out of the tach, where do I
erminate the wire?  I have a late Series 5, negative ground.

Thanks in advance,

Bill Mounce
Easton, PA
1967 SV, formerly known as 'The Paperweight'
______________________________________________
lpines at autox.team.net
onate: http://www.team.net/donate.html
uggested annual donation  $17.25
rchive: http://www.team.net/archive
orums: http://www.team.net/forums
nsubscribe/Manage:
http://autox.team.net/mailman/options/alpines/jacranwell@aol.com