[Alpines] welding manifold

[JACranwell at aol.com]

For what it's worth, I run my SIII with a Webber 28/32 DCD, which is a twin 
choke, progressive downdraft, and bolts straight on in place of the original 
Solex.
I believe that, again the 28/32 designates the throttle sizes. The 
progressive part is such that the larger throttle starts to open when the main throttle 
is 75% open, and catches up, so they are both fully open at full throttle.

The performance is excellent, and I believe better than the twin-Stromberg 
option, which I found a bit of a pain to keep tuned due to the steep angle of 
the carbs/manifold. Also, my car is a leftie, so all sorts of bits get in the 
way of the Stromberg setup.

Julian.