[Alpines] SV Oil gauge question
Bill Mounce
bmounce at rcn.com
Wed Jun 4 15:05:58 MDT 2008
Hello all
I have a pressure gauge that has a line that is too short. On its end is an
unusual compression fitting, which appears to be 3/16", 37 or 45 degree
inverted flare with male threads. (On the block is a different fitting with
1/8" tubing). I have been trying to match the two lines using Swagelok
fittings, but the fitting is not 3/16"- the OD is correct, but the threads
are wrong. I do not want to cut the fitting off the line at this point, as
I need to be sure I can get something to work. The line is 11/64", so there
is no compression fitting that will accept it.
Anyone know what the thread is?
Thanks,
Bill
PS Did metric show up on any of these cars, or are they too early?
More information about the Alpines
mailing list