[Alpines] putting in a distributor
Brits'n'Pieces (Eric Frenken)
lists at brits-n-pieces.com
Tue Oct 30 05:49:06 MST 2007
Allan, unfortunately not! The shaft of the distributor is keyed, but not the
housing. You can rotate the housing while the shaft is inserted into its
counterpart in the engine. By turning the housing you'll destroy the timing
and you'll have to adjust it again.
Eric
http://brits-n-pieces.com
-----Urspr|ngliche Nachricht-----
Von: alpines-bounces+lists=brits-n-pieces.com at autox.team.net
[mailto:alpines-bounces+lists=brits-n-pieces.com at autox.team.net] Im Auftrag
von tom.hill at att.net
Gesendet: Dienstag, 30. Oktober 2007 13:43
An: Allan Ballard; 'Alpines'
Betreff: Re: [Alpines] putting in a distributor
Yes it is. The distributor has a keyed drive that only allows it to be
installed one way.
-------------- Original message from "Allan Ballard"
<aballard at ix.netcom.com>: --------------
> I am looking at replacement of a distributor (SV engine).
>
> The engine is in time; is this just a matter of lifting out
> The old distributor and inserting the replacement?
>
> Thanks in advance,
>
> Allan
> Atlanta, GA
More information about the Alpines
mailing list