[6pack] [TR] TR6 engine reinstall

[Robert Rochlin]

Hi Frank,
	When I rebuilt my TR6 engine I did the same thing right down to the EZ lift.  It is very difficult, in my experience, to get the car high enough to get the angle  needed to remove/replace the engine with the trans attached. It is much easier in a home garage to reattach the transmission to the engine after the engine is installed. I reinstalled the manifolds, carbs and fan after the engine was back in the car.
	Best,
	Bob
	’72 TR6

> On Aug 11, 2024, at 7:40 PM, dave northrup <dave at ranteer.com> wrote:
> 
> I’m thinking if I move the tran back a few inches (disconnect the driveshaft and tran mount),  then we can slide the tran back into the engine.
>  
> Does this make sense or am I missing something? 
>  
> I’m thinking we will install the carbs and exhaust manifold after engine is in place.
>  
> I’m bringing you the alternator, coil, dizzy, engine mounts, fan belt, ??
>  
> I’m thinking I should add the fan after the engine is in.  it’s brand new; don’t want to damage it.
> ** triumphs at autox.team.net <mailto:triumphs at autox.team.net> **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/rrochlin@comcast.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20240812/bbcfb2cc/attachment.htm>