[6pack] 6pack Digest, Vol 81, Issue 7

Wed Nov 24 12:19:06 MST 2021

Thanks Patrick. Pretty high tech connectors!

Bob Fabie

On Wed, Nov 24, 2021 at 10:47 AM David Friedlander <forzion7 at gmail.com>
wrote:

> They don't give those away, do they Dave?
>
> Dave
>
> On Wed, Nov 24, 2021 at 11:25 AM DAVID MASSEY <dave1massey at cs.com> wrote:
>
>> You mean something like this:
>>
>>
>> https://www.mcmaster.com/universal-joints/constant-velocity-single-u-joints/
>>
>>
>> Dave
>>
>>
>>
>> -----Original Message-----
>> From: Patrick Bloem <patrick.bloem at sbcglobal.net>
>> To: 6pack at autox.team.net <6pack at autox.team.net>
>> Sent: Wed, Nov 24, 2021 9:53 am
>> Subject: Re: [6pack] 6pack Digest, Vol 81, Issue 7
>>
>> Many years ago I replaced my throttle linkages with a helical Flexures
>> that here being used on Indy Car engines. Not sure where you can get them
>> but I was doinf business with them back in the 90's and got same samples
>> that have worked great to this day. They are located in Ontario, CA. HC
>> Pacific <https://helicalcouplings.com/helical-u-joints.aspx>
>>
>> HC Pacific
>> Helical U-Joints from HC Pacific. Contact us for quantity discounts.
>> <https://helicalcouplings.com/helical-u-joints.aspx>
>>
>>
>>
>> J. Patrick Bloem
>> 9168 TR250
>> 1973 TR6
>>
>>
>> On Wednesday, November 24, 2021, 09:40:53 AM EST,
>> 6pack-request at autox.team.net <6pack-request at autox.team.net> wrote:
>>
>>
>> Send 6pack mailing list submissions to
>>     6pack at autox.team.net
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>>     http://autox.team.net/mailman/listinfo/6pack
>> or, via email, send a message with subject or body 'help' to
>>     6pack-request at autox.team.net
>>
>> You can reach the person managing the list at
>>     6pack-owner at autox.team.net
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of 6pack digest..."
>>
>>
>> Today's Topics:
>>
>>   1. Re: Throttle Linkage ?S? Connectors (Tomislav Marincic)
>>   2. Re: Throttle Linkage ?S? Connectors (rmf3860 rmf3860)
>>   3. Re: Throttle Linkage ?S? Connectors (Jim Jones)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Wed, 24 Nov 2021 12:35:53 +0000
>> From: Tomislav Marincic <tomislav.marincic at earthlink.net>
>> To: robertrudolphi at yahoo.com, 6pack at autox.team.net
>> Subject: Re: [6pack] Throttle Linkage ?S? Connectors
>> Message-ID: <7018a786-b1bf-d48d-329c-a523ebe9a879 at earthlink.net>
>> Content-Type: text/plain; charset=utf-8
>>
>> Hello Robert,
>> ?
>> I'll snap you a photo of the barrel linkage in place. One of them works,
>> but if I recall correctly, there was no way to use two and get them
>> installed without removing the carbs?and linkage.
>> ?
>> I Jet Hot coated both of my manifolds, and wrapped the exhaust header in
>> Thermo-Tec?exhaust tape. The Jet Hot keeps the manifolds looking nice, and
>> keeps the header from corroding, but it won't cure your fuel cook-off
>> problems. Your best bet is one of Joe Alexander's heat shields, which I
>> think are being sold through Moss as well. https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
>> (
>> https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
>> )
>> ?
>> https://www.summitracing.com/parts/the-11021?rrec=true (
>> https://www.summitracing.com/parts/the-11021?rrec=true)
>> ?
>> Good Luck, Tom
>> ?
>> ?
>> ?
>> ?
>> -----Original Message-----
>> From: robert rudolphi
>> Sent: Nov 23, 2021 1:23 PM
>> To: 6pack at autox.team.net , Tomislav Marincic
>> Subject: Re: [6pack] Throttle Linkage ?S? Connectors
>> ?
>> To follow up on this I am having my carbs rebuilt this winter (Joe Curto)
>> and was thinking about have the intake and stock exhaust manifolds Jet
>> coated. I am trying to reduce hard starting when hot. Would also like to
>> get the throttle linkages re-plated/refinished and was wondering what is
>> the best way to go?
>> ?
>> Thanks in advance for any feedback
>> ?
>> Robert
>> ?
>> ?
>> ?
>> ?
>> ?
>> On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomislav Marincic wrote:
>> ?
>> ?
>> ?
>> ?
>> ?
>> ?
>> When I set up my dual ZS175?s I used new link clips from Roadster
>> Factory. They quickly became distorted and introduced slop into the linkage.
>> ?
>> I?m currently using one SU link clip sourced from Richard Good, which is
>> much sturdier and more rust-resistant than the ZS part. I?m also using a
>> single rigid coupling that I sourced from Grainger. I forget why, but
>> installing two shaft linkages was problematic, and the gap between carb
>> throttle shafts was too wide to use two SU linkages.
>> ?
>> I might have one of each in my spares if you need them.
>> ?
>> https://www.grainger.com/search?searchQuery=nomar+clx-5-5-a&searchBar=true
>> ?
>> https://www.goodparts.com/product/folded-coupler-carb-shaft/
>> ?
>> Pix on request?Tom
>> ?
>> ?
>> ?
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation? $12.96
>> Archive: http://www.team.net/archive
>> ?
>> ?
>> 6pack at autox.team.net
>> http://autox.team.net/mailman/listinfo/6pack
>> ?
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/6pack/robertrudolphi@yahoo.com
>> ?
>>
>> ?
>>
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Wed, 24 Nov 2021 07:49:10 -0600
>> From: rmf3860 rmf3860 <bobfabie at gmail.com>
>> To: Tomislav Marincic <tomislav.marincic at earthlink.net>
>> Cc: 6pack at autox.team.net, robertrudolphi at yahoo.com
>> Subject: Re: [6pack] Throttle Linkage ?S? Connectors
>> Message-ID:
>>     <CA+aQ7wzXnWC+nqdTPzCuXscm6Qph4Yypte_AfdEiMHbp=3=pHg at mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Thanks Tom. I have a heat deflector. I bought it many years ago.
>> Considering the slop in my throttle linkage, I decided to order a
>> replacement from Richard at Goodparts.
>>
>> Bob Fabie
>>
>> On Wed, Nov 24, 2021 at 6:36 AM Tomislav Marincic <
>> tomislav.marincic at earthlink.net> wrote:
>>
>> > Hello Robert,
>> >
>> > I'll snap you a photo of the barrel linkage in place. One of them works,
>> > but if I recall correctly, there was no way to use two and get them
>> > installed without removing the carbs and linkage.
>> >
>> > I Jet Hot coated both of my manifolds, and wrapped the exhaust header in
>> > Thermo-Tec exhaust tape. The Jet Hot keeps the manifolds looking nice,
>> and
>> > keeps the header from corroding, but it won't cure your fuel cook-off
>> > problems. Your best bet is one of Joe Alexander's heat shields, which I
>> > think are being sold through Moss as well.
>> >
>> https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
>> > (
>> >
>> https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
>> > )
>> >
>> > https://www.summitracing.com/parts/the-11021?rrec=true (
>> > https://www.summitracing.com/parts/the-11021?rrec=true)
>> >
>> > Good Luck, Tom
>> >
>> >
>> >
>> >
>> > -----Original Message-----
>> > From: robert rudolphi
>> > Sent: Nov 23, 2021 1:23 PM
>> > To: 6pack at autox.team.net , Tomislav Marincic
>> > Subject: Re: [6pack] Throttle Linkage ?S? Connectors
>> >
>> > To follow up on this I am having my carbs rebuilt this winter (Joe
>> Curto)
>> > and was thinking about have the intake and stock exhaust manifolds Jet
>> > coated. I am trying to reduce hard starting when hot. Would also like to
>> > get the throttle linkages re-plated/refinished and was wondering what is
>> > the best way to go?
>> >
>> > Thanks in advance for any feedback
>> >
>> > Robert
>> >
>> >
>> >
>> >
>> >
>> > On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomislav Marincic wrote:
>> >
>> >
>> >
>> >
>> >
>> >
>> > When I set up my dual ZS175?s I used new link clips from Roadster
>> Factory.
>> > They quickly became distorted and introduced slop into the linkage.
>> >
>> > I?m currently using one SU link clip sourced from Richard Good, which is
>> > much sturdier and more rust-resistant than the ZS part. I?m also using a
>> > single rigid coupling that I sourced from Grainger. I forget why, but
>> > installing two shaft linkages was problematic, and the gap between carb
>> > throttle shafts was too wide to use two SU linkages.
>> >
>> > I might have one of each in my spares if you need them.
>> >
>> >
>> https://www.grainger.com/search?searchQuery=nomar+clx-5-5-a&searchBar=true
>> >
>> > https://www.goodparts.com/product/folded-coupler-carb-shaft/
>> >
>> > Pix on request?Tom
>> >
>> >
>> >
>> > _______________________________________________
>> > Support Team.Net http://www.team.net/donate.html
>> > Suggested annual donation  $12.96
>> > Archive: http://www.team.net/archive
>> >
>> >
>> > 6pack at autox.team.net
>> > http://autox.team.net/mailman/listinfo/6pack
>> >
>> > Unsubscribe/Manage:
>> > http://autox.team.net/mailman/options/6pack/robertrudolphi@yahoo.com
>> >
>> >
>> >
>> > _______________________________________________
>> > Support Team.Net http://www.team.net/donate.html
>> > Suggested annual donation  $12.96
>> > Archive: http://www.team.net/archive
>> >
>> >
>> > 6pack at autox.team.net
>> > http://autox.team.net/mailman/listinfo/6pack
>> >
>> > Unsubscribe/Manage:
>> > http://autox.team.net/mailman/options/6pack/bobfabie@gmail.com
>> >
>> >
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <
>> http://autox.team.net/pipermail/6pack/attachments/20211124/ed838233/attachment-0001.htm
>> >
>>
>> ------------------------------
>>
>> Message: 3
>> Date: Wed, 24 Nov 2021 14:39:50 +0000 (UTC)
>> From: Jim Jones <jimjcmo at yahoo.com>
>> To: Tomislav Marincic <tomislav.marincic at earthlink.net>,
>>     <robertrudolphi at yahoo.com>,  <6pack at autox.team.net>
>> Subject: Re: [6pack] Throttle Linkage ?S? Connectors
>> Message-ID: <385333468.2961619.1637764790031 at mail.yahoo.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> I have a new exhaust shield available if anyone would want it. Email me
>> for price if you?re interested.
>> Jim JonesFormer ?72 6 owner
>>
>>
>> Sent from Yahoo Mail for iPad
>>
>>
>> On Wednesday, November 24, 2021, 6:36 AM, Tomislav Marincic <
>> tomislav.marincic at earthlink.net> wrote:
>>
>> Hello Robert,
>> ?
>> I'll snap you a photo of the barrel linkage in place. One of them works,
>> but if I recall correctly, there was no way to use two and get them
>> installed without removing the carbs?and linkage.
>> ?
>> I Jet Hot coated both of my manifolds, and wrapped the exhaust header in
>> Thermo-Tec?exhaust tape. The Jet Hot keeps the manifolds looking nice, and
>> keeps the header from corroding, but it won't cure your fuel cook-off
>> problems. Your best bet is one of Joe Alexander's heat shields, which I
>> think are being sold through Moss as well. https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
>> (
>> https://mossmotors.com/aluminum-heat-shield-by-a-r-e-for-zenith-stromberg-carbs?utm_source=feed&utm_medium=free&utm_campaign=shopping&gclid=EAIaIQobChMI4v7154Cx9AIVhcqGCh0tWAy8EAQYAiABEgKXSPD_BwE
>> )
>> ?
>> https://www.summitracing.com/parts/the-11021?rrec=true (
>> https://www.summitracing.com/parts/the-11021?rrec=true)
>> ?
>> Good Luck, Tom
>> ?
>> ?
>> ?
>> ?
>> -----Original Message-----
>> From: robert rudolphi
>> Sent: Nov 23, 2021 1:23 PM
>> To: 6pack at autox.team.net , Tomislav Marincic
>> Subject: Re: [6pack] Throttle Linkage ?S? Connectors
>> ?
>> To follow up on this I am having my carbs rebuilt this winter (Joe Curto)
>> and was thinking about have the intake and stock exhaust manifolds Jet
>> coated. I am trying to reduce hard starting when hot. Would also like to
>> get the throttle linkages re-plated/refinished and was wondering what is
>> the best way to go?
>> ?
>> Thanks in advance for any feedback
>> ?
>> Robert
>> ?
>> ?
>> ?
>> ?
>> ?
>> On Tuesday, November 23, 2021, 12:13:49 PM EST, Tomislav Marincic wrote:
>> ?
>> ?
>> ?
>> ?
>> ?
>> ?
>> When I set up my dual ZS175?s I used new link clips from Roadster
>> Factory. They quickly became distorted and introduced slop into the linkage.
>> ?
>> I?m currently using one SU link clip sourced from Richard Good, which is
>> much sturdier and more rust-resistant than the ZS part. I?m also using a
>> single rigid coupling that I sourced from Grainger. I forget why, but
>> installing two shaft linkages was problematic, and the gap between carb
>> throttle shafts was too wide to use two SU linkages.
>> ?
>> I might have one of each in my spares if you need them.
>> ?
>> https://www.grainger.com/search?searchQuery=nomar+clx-5-5-a&searchBar=true
>> ?
>> https://www.goodparts.com/product/folded-coupler-carb-shaft/
>> ?
>> Pix on request?Tom
>> ?
>> ?
>> ?
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation? $12.96
>> Archive: http://www.team.net/archive
>> ?
>> ?
>> 6pack at autox.team.net
>> http://autox.team.net/mailman/listinfo/6pack
>> ?
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/6pack/robertrudolphi@yahoo.com
>> ?
>>
>> ?
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation? $12.96
>> Archive: http://www.team.net/archive
>>
>>
>> 6pack at autox.team.net
>> http://autox.team.net/mailman/listinfo/6pack
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/6pack/jimjcmo@yahoo.com
>>
>>
>>
>>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <
>> http://autox.team.net/pipermail/6pack/attachments/20211124/4fa9bbf6/attachment.htm
>> >
>>
>> ------------------------------
>>
>> Subject: Digest Footer
>>
>> _______________________________________________
>> 6pack mailing list
>> 6pack at autox.team.net
>> http://autox.team.net/mailman/listinfo/6pack
>>
>>
>> ------------------------------
>>
>> End of 6pack Digest, Vol 81, Issue 7
>> ************************************
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.96
>> Archive: http://www.team.net/archive
>>
>>
>> 6pack at autox.team.net
>> http://autox.team.net/mailman/listinfo/6pack
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/6pack/dave1massey@cs.com
>>
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.96
>> Archive: http://www.team.net/archive
>>
>>
>> 6pack at autox.team.net
>> http://autox.team.net/mailman/listinfo/6pack
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/6pack/forzion7@gmail.com
>>
>> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
>
>
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/bobfabie@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20211124/82ce2345/attachment-0001.htm>