[6pack] Cylinder Head Bolts

[BILL WELLBAUM]

You should be looking for two taps--5/16 x 24 and a 3/8 x 24. Those two will cover almost all block holes.


> On June 14, 2021 at 8:11 PM rmf3860 rmf3860 <bobfabie at gmail.com> wrote:
> 
>     I’ve looked “everywhere” and cannot find a 7/16-24 thread chaser tap to clean out the block holes. I assume I’m correct about the 7/16-24 size.
> 
>     Thanks.
>     Bob Fabie
>     Fredericksburg, VA
>     _______________________________________________
>     Support Team.Net http://www.team.net/donate.html
>     Suggested annual donation $12.96
>     Archive: http://www.team.net/archive
> 
> 
>     6pack at autox.team.net
>     http://autox.team.net/mailman/listinfo/6pack
> 
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/6pack/wcwellbaum@cox.net
> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20210615/38c5f868/attachment.htm>