[6pack] Cylinder Head Bolts

[Richard Lindsay]

Choose a long thread bolt then cut a long groove or two down the length of
the threads using a cut-off wheel in your Dremel tool. That's all you need
to clean the threads.

On Mon, Jun 14, 2021, 7:11 PM rmf3860 rmf3860 <bobfabie at gmail.com> wrote:

> I’ve looked “everywhere” and cannot find a 7/16-24 thread chaser tap to
> clean out the block holes. I assume I’m correct about the 7/16-24 size.
>
> Thanks.
> Bob Fabie
> Fredericksburg, VA
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
>
>
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/richardolindsay@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20210614/27b35b46/attachment.htm>