[6pack] Motor Install

[Richard Taylor]

Along with these instruction choices, I recommend levering the engine rearward as much as possible before tightening the mounting bolts. Doing so, along with fresh mount (rubbers) so removing/replacing of the accessory belt won’t cause a “fit.” 

Dick 
> On Jul 13, 2021, at 10:45 AM, BILL WELLBAUM <wcwellbaum at cox.net> wrote:
> 
> We just installed my engine 2 weeks ago. We loosely bolted both left and right hand mounts to the block, got it more or less lined up, and then bolted them to the body mounts. Keep everything loosey goosey until everything is lined up--then tighten them down. 
> 
>> On July 13, 2021 at 1:06 AM rmf3860 rmf3860 <bobfabie at gmail.com> wrote: 
>> 
>> I’m planning ahead, and It’s been too many years since I did it last, so here’s my question:
>> 
>> Is it best to install the engine with the brackets and motor mounts attached to the block, and then line up the mounts to the frame?
>> 
>> Couldn’t find much help in Bentleys. 
>> 
>> Thank you all. 
>> 
>> Bob Fabie
>> _______________________________________________ 
>> Support Team.Net http://www.team.net/donate.html 
>> Suggested annual donation $12.96 
>> Archive: http://www.team.net/archive 
>> 
>> 
>> 6pack at autox.team.net 
>> http://autox.team.net/mailman/listinfo/6pack 
>> 
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/6pack/wcwellbaum@cox.net 
>> 
> 
>  
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> 
> 
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/6pack/taylorturbo6@yahoo.com
>