[6pack] Dash and fascia trial fitting

[Richard Lindsay]

Hello Friends,
   Today I remounted my '75 TR6's heater box, correcting an alignment
problem. Everything is now back as it should be. I also installed the
driver side windscreen defroster vent and plumbed it to the heater. The new
hose fit properly. Its stiff so preforming to the correct shape let it go
in easily. I clamped the ends, as if they could move, with plastic cable
ties pulled quite tight, rather than with metal hose clamps.
  I next installed the rest of the dash pads, the lower bits. One of the
parts is new and has yet to be trimmed on the upper right. With those bits
in I could trial-fit the wood fascia. I now know where edges must be
trimmed and other parts shifted one way or the other for the optimal fit.
See attached photos.

Rick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20191120/86f98343/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20191120_121550.jpg
Type: image/jpeg
Size: 3017426 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/6pack/attachments/20191120/86f98343/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20191120_121606.jpg
Type: image/jpeg
Size: 4414713 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/6pack/attachments/20191120/86f98343/attachment-0003.jpg>