[6pack] Fuel filler orientation

[anabil007]

Depends on what you intended for using the car...factory put it on passenger side...remember that the car was made for right hand side...so to open the hinges are on the left...strick  Concours Judges would look for that ( I know that from experince ) also the gauges were placed for right hand drive, after we retired from Concours, SCAA I reversed the gauges, making it much easery to see oil pressure and temp.
So...if yours is to be a driver...put them where it is where YOU want,

Bill Pugh
Wallace, CA


> On Nov 3, 2019, at 9:13 AM, James_ via 6pack <6pack at autox.team.net> wrote:
> 
> Hinge toward passenger. 
> Opening conveniently accessed by driver.
> 
>> On Nov 3, 2019, at 8:50 AM, Richard Lindsay via 6pack <6pack at autox.team.net> wrote:
>> 
>> Hello friends, 
>>   If you've followed any of the work on my '75 US specification TR6 you will know that the following question is probably irrelevant...but I ask anyway, for your sage advice:
>> 
>> When reinstalling the fuel filler cap, which is the correct orientation? Hinge side toward the front. Or rear? Or to one side or another?
>> 
>>   Thanks in advance of your reply.
>> 
>> Rick
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.96
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> 
>> 6pack at autox.team.net
>> http://autox.team.net/mailman/listinfo/6pack
>> 
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/6pack/jattr6@hotmail.com
>> 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> 
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/6pack/anabil007@comcast.net
>