[6pack] [TR] 3-point seat belts (TR4, TR250)

[glemon at neb.rr.com]

The Pegasus Racing install kit looks just like the stuff I used to install mine, except the big flat washer and such came from the local hardware store.

Greg Lemon

---- Keith Stewart <keithstewart at bell.net> wrote: 
> Car is gone so I cannot get pictures but the retractor would be on the wheel
> well behind the seat. Most seat belt kits come with the appropriate hardware
> and my 62 TR4 which never had seat belts or three point belts came with
> bolts already in place on the wheel well. Something similar to
> https://www.pegasusautoracing.com/productselection.asp?Product=2383 should
> be used so those large flat washers are on the underside of the body. 
> 
>  
> 
> The location on the wheel well is similar to what you might find on a TR6
> like this:
> 
> 
> 
>  
> 
> Hope this helps.
> 
>  
> 
>  
> 
> Keith Stewart
> 
> keithstewart at bell.net
> 
>  
> 
>  
> 
>  
> 
> From: Andrew Uprichard <auprichard at uprichard.net> 
> Sent: September 3, 2018 2:30 PM
> To: 'Triumphs List' <triumphs at autox.team.net>; 6pack at autox.team.net
> Subject: [TR] 3-point seat belts (TR4, TR250)
> 
>  
> 
> Some time ago I bought a 3-point seatbelt kit from TRF (part
> TRFSB303/1000).  I was going to use them in a TR250, but in the meantime I
> have completed the restoration of a TR4 and would like to use them in this
> car.
> 
>  
> 
> The kit has a "stalk" which presumably attaches to the gearbox tunnel.  It
> also has a floor fitting which I imagine goes somewhere around the bottom of
> the B-post.  The pieces which I am having difficulty with are the recoil
> part and the shoulder attachment.
> 
>  
> 
> Has anyone on the list fitted such a seat-belt and if so, can you share pics
> of how and where you attached the various anchors?  Thanks !
> 
> Andrew Uprichard
> 
> Jackson, Michigan
> 
>  
>