[6pack] Turn Signals

[glemon at neb.rr.com]

9:00 I think so it trips the little levers on the switch going out of position and back.  Most everything on my car works, but the turn signals don't cancel.  I messed with them a little after I redid everything, but I put it down to the new switch being out of tolerance.  I am kind of picky about everything working as intended but I wrote this one off as not worth the effort (I worked under the column quite a bit early on for some general problems with the wiring and the new switch, didn't really want to dig in there again.

As I said at the beginning, everything else works, so overall I feel pretty fortunate.

Greg

---- Jim Jones via 6pack <6pack at autox.team.net> wrote: 
> I owned two TR6's and both had the problems you described. So I assumed they came from the factory that way. :-o Jim Jones
> 
>       From: David Friedlander via 6pack <6pack at autox.team.net>
>  To: 6-Pack <6pack at autox.team.net>; New England Triumphs <net at newenglandtriumphs.org> 
>  Sent: Wednesday, September 7, 2016 9:31 AM
>  Subject: [6pack] Turn Signals
>    
> Hey all;
> 
> I find that my turn signals no longer cancel reliably after making a turn. 
> And, I can't recall: Is the detent on the spring clip (on the steering column)
> supposed to 'point' to the 12 o'clock position or the six o'clock? Not sure 
> why it moves out of position from time-to-time.....
> 
> Thanks for any help!
> 
> Dave
> '74 Six
> '59 Three
> 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> 
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/6pack/jimjcmo@yahoo.com
> 
> 
> 
>