[6pack] Roller rocker price increase

[Ted Schumacher]

  Hi List(s). Sorry to do the impersonal mass email thing, but it is the 
quickest method of getting this out. Our roller rocker manufacturer has 
a price increase effective 1/1/2017.  Roughly 7%. Prices on our website 
currently do not reflect this increase. We will be changing prices early 
January.  Our roller  rockers are American made. They feature the 
largest roller tip in the industry. Oil-lite bronze shaft bushings, 
rather than needle, offer greater dependability with out the stress of 
rocker shaft wear.  Both roller tip and pushrod cup are oiled by 
passages in rocker arm.  Stop and think about this for a moment. needle 
bearings are good for supporting a rotating assembly such as gears. But, 
the rocker arm does not rotate 360 degrees on the rocker shaft so you 
have the stress of extremely hard needle bearings wearing on a very 
small area.  Plus, needle bearings, by design, allow oil to escape 
between the needles.   Even the big cam manufacturers are going back to 
bushings.

Order by January 15 and we will honor the current website pricing. 
Please make sure to reference this email for that pricing. Thank y9ou 
for your time.

Ted


-- 
Ted Schumacher
tedtsimx at bright.net
http://www.tsimportedautomotive.com
108 S. Jefferson St.
Pandora, Ohio, USA 45877
Fax: 419.384.3272 (24 Hrs.)
Phone: 800.543.6648 (US & Canada)
Tech/ Gen. Information/ Worldwide: 419.384.3022