[6pack] Fw: Air injection rail - exhaust manifold

[J B]

Those look great . Good job.

      On Wednesday, May 20, 2015 9:20 PM, Bud Rolofson via 6pack <6pack at autox.team.net> wrote:
   

 Those are nice. Good work
Bud

Sent from my Commodore 64

> On May 20, 2015, at 7:50 PM, James_ via 6pack <6pack at autox.team.net> wrote:
> 
> Let's see if attaching the image works. 
> The air rail I fabricated. (I made some others but all look the same)
> I made it look pretty by ceramic coating it. Very pleased with the final result. 
> Because the original air rail used longer tube nuts and the ones available to me in the correct thread size weren't quite long enough, I used compression sleeves to make a tighter seal against the inner tubes and allow the nuts to draw tight without bottoming out. 
> 
> <image.jpeg>
> 
> 
> 
> <image.jpeg>
> 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> 
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/6pack/levilevi@comcast.net
> 
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

6pack at autox.team.net
http://autox.team.net/mailman/listinfo/6pack

Unsubscribe/Manage: http://autox.team.net/mailman/options/6pack/jb_2email@yahoo.com



   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20150521/856d3b3f/attachment.html>