[6pack] clutch throwout bearing issue

[Jay Snable]

It looks like you are missing the throwout bearing carrier? Check your bag of
parts and see if its still attached to the old bearing...

Jay
73 TR6


On Aug 23, 2014, at 1:17 PM, dave n <dave at ranteer.com> wrote:

> put in the flywheel:  http://www.ranteer.com/davescars/tr6/DSCN1184.JPG
>
> put in the clutch: http://www.ranteer.com/davescars/tr6/DSCN1187.JPG
>
> put in the pressure plate:
http://www.ranteer.com/davescars/tr6/DSCN1190.JPG
>
> here is the tranny:  http://www.ranteer.com/davescars/tr6/DSCN1192.JPG
>
> but the throwout bearing seems to just sit, off center.
> http://www.ranteer.com/davescars/tr6/DSCN1191.JPG
>
> we carefully bagged, labeled, and saved all the parts when we took it
apart.
>
> here is the bentley manual:
http://www.ranteer.com/davescars/tr6/Bentley.jpg
>
> and the moss page:
> http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=32782
>
> what am I missing?  or what is wrong?
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/6pack/jsnable@mac.com