[6pack] tr250 oil pressure issue

[Andrew Packard]

I'm the guy with the TR250 oil pressure problem.  I replaced my oil pressure
regulator spring with a HD one.  The one I took out measured short and the new
one was longer than spec from Bentley.  It helped, but after I got well up to
temp, pressure disappeared at idle and water boiled over.  I'm travelling for
work this week, so I dropped off my car with my mechanic friend with a new oil
pump and some plastic gauge to check the bearing clearance.  I'll find out the
status soon.  This is more than a little frustrating with Triumphest starting
next week.
Andy
 
 

From: Yahoo <brucesimms2003 at yahoo.ca>
To:
"6pack at autox.team.net" <6pack at autox.team.net> 
Sent: Wednesday, September 25,
2013 8:22 AM
Subject: [6pack] tr250 oil pressure issue


Did the guy with the
oil pressure issue on his new 250 motor ever get this
sorted?  inquiring minds
want to know.    

I'm hoping to do a repeat on the
San Diego mechanic with
(300,000?) miles on his 250 and never did the bottom
end.  In the Triumph
magazine article he said he just does regular oil
changes with STP.    I've
shaved the head and a hotter cam so I may have added
additional stress to the
engine.  my oil pressure hasn't deteriorated in 16
years of ownerhip.
Cheers,  Bruce Simms 73 tr6

________________________________________
6pack at autox.team.net

Donate: http://www.team.net/donate.html
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/6pack/apackard68@att.net