[6pack] indescribable

[Larry Young]

And what can you tell us about the cam?  It would be nice to know: (1) 
duration seat-to-seat (2) duration 0.050 lift (3) total cam lift and (4) 
lobe separation angle and (5) intake lobe center angle.  Are you running 
stock lifter diameter of 0.80 and stock 1.5:1 rockers? I have dealt with 
Daryyl quite a bit for TR3/4 cam blanks.  I'm just finishing a frame off 
restoration of a TR250 I've had from new.  I tried to mimic the approach 
Kastner did to get a TR250 to run 128 mph with minimal changes to the 
engine.  Mine probably won't go that fast, that's why I said "mimic".
Larry Young
www.TildenTechnologies.com

On 8/17/2012 8:50 AM, Robert M. Lang wrote:
> Hi - believe it or not, I more or less assumed there was a connection 
> to Racetorations. Family connection: even better!
>
> What sort of chassis dyno were you running on?
>
> And - we assume a free-flow exhaust, but what compression ratio are 
> you running? And last - what size chokes are you running.
>
> Last - what's the torque peak?
>
> regards,
> rml
> --------------------------------------------------------------------------- 
>
> Bob Lang              Triumph TR6!!            |  This space for rent
> Former NER Solo Chair                          |"
> Voice:617-253-7438                             |  Cell: 339-927-4489
> --------------------------------------------------------------------------- 
>
>
> ________________________________________
>
> 6pack at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/6pack/cartravel@pobox.com