[6pack] Final Throws

[Dwayne Cooper]

David and Others: Thanks for the tip1 -- I'll play some soothing music and
take my time (patience is not my strong point)! Thanks, Dwayne
 > From: djfidler at rogers.com
> Date: Mon, 7 Nov 2011 23:17:40 -0500
> To: dc.bruin at gmail.com
> CC: 6pack at autox.team.net
> Subject: Re: [6pack] Final Throws
>
> Dwayne,
>
> It will NOT slide. The only way to get it in is to put it in position, tuck
> the back edge of T into the channel in the center of the header rail and,
> using a flat blade screwdriver slowly work your way out to the end pushing
the
> front edge of the T into the slot. Then go out to the other end. This will
> take about 45 mins all told, and you'll need patience.
>
> I wrote a 2 part article about installing soft tops in 6-PACK magazine,
this
> step is described in part two in the summer 2010 issue, which is available
in
> the member's area at www.6-PACK.org.
>
> Best regards,
>
> David.
> > Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/6pack/dc_bruin@hotmail.com