[6pack] wiring question

[Dale]

Andrew
 
In Dan Master's book, for TR 250's and early TR-6's, there is no
green wire going to the ignition switch. Are you sure that a PO did not place
this there or that is not a lead going to the fan motor?
 
Dale 

From: Andrew
Uprichard <auprichard at uprichard.net>
To: triumphs at autox.team.net;
6pack at autox.team.net 
Sent: Friday, December 9, 2011 4:01 PM
Subject: [6pack]
wiring question

I am wiring the ignition on my 250 and have located the
corresponding
section of the harness.  As expected, there is a brown (live)
two whites
(ignition) and a white/red (starter).  But there is also a green: 
does
anyone know why this is so?  I thought green was equivalent to a
post-fuse
white, i.e., those things like lights and turn signals which operate
with
the ignition on.



Thanks in advance for any advice.



Andrew Uprichard
________________________________________

6pack at autox.team.net

Donate:
http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums:
http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/6pack/tpdwinch@yahoo.com