[6pack] hub remove and replace

[Bob Danielson]

Phil raises a good point and this is the time to install inserts in the TA. 
The easiest way to do it is with Rick Patton's TA Repair Kit 
(http://www.pattonmachine.com/TA-Repair-Jig.htm)  This jig makes repairing 
all 12 holes so easy and you'll get perfect alignment every time. A lot of 
the guys in 6-Pack have bought this kit and swear by its simplicity and 
accuracy.  A lot of clubs have also bought it and have it available to their 
members.

Bob

Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection,
Toyota 5 speed & Nissan LSD
http://tr6.danielsonfamily.org

--------------------------------------------------
From: "Philip Barnes" <pebarnes71 at gmail.com>
Sent: Monday, October 11, 2010 7:24 PM
To: "Sally or Dick Taylor" <tr6taylor at webtv.net>
Cc: <6pack at autox.team.net>
Subject: Re: [6pack] hub remove and replace

> Dave,
> In addition to what Dick said, you may wish to be prepared to repair any
> stripped threads in the aluminum trailing arm. It's not unusual for the
> threads to deteriorate from corrosion between the steel fasteners and the
> aluminum (aluminium, ahem) arm. Any good auto supply place should be able 
> to
> set you up with Keenserts or the equivalent. That's not a hard job, 
> either,
> if you can drill a straight hole.
> -- Phil Barnes
> -- '71 TR6 since 1977
> _______________________________________________
>
> 6pack at autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/6pack/75tr6@tr6.danielsonfamily.org