[6pack] cracked differential mounts

[Bob Danielson]

If the pin itself is cracked, you probably need to replace the pin by 
cutting an access panel in the rear deck to get at the top of the pin.

Here's how I fixed my cracked mounts.

http://tr6.danielsonfamily.org/DiffMounts.htm

Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection,
Toyota 5 speed & Nissan LSD
http://tr6.danielsonfamily.org

--------------------------------------------------
From: "Bob Rochlin" <r_rochlin at hotmail.com>
Sent: Friday, February 26, 2010 2:21 PM
To: <6pack at autox.team.net>
Subject: [6pack] cracked differential mounts

> Hi Everyone, I discovered a bad differential mount on the right rear of my
> car and it looks like the differential mounting pin may have a hairline 
> crack.
> I seem to remember that a lister did a pretty through description of 
> repairing
> the diff mounts, but I was unable to find it in the archives.  Can anyone
> steer me in the right direction and maybe suggest a repair strategy that
> doesn't involve more that removing the diff and doing some welding? 
> Thanks.
> Bob Rochlin         '72 TR6
> _________________________________________________________________
> Hotmail: Trusted email with Microsofts powerful SPAM protection.
> http://clk.atdmt.com/GBL/go/201469226/direct/01/
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> http://www.team.net/archive
>
> You are subscribed as 75tr6 at tr6.danielsonfamily.org