[6pack] Turn Signal Switch - Return Function

[Sally or Dick Taylor]

Doug---If this non-canceling just started, you may see the cause by removing the left side cover and shining a light inside while turning the steering wheel. Start with the 'wheel pointed straight ahead, as would normally be the case before operating the turn signal. As you turn the wheel, you will see what triggers the canceling operation. (little springs and cams, etc.)  Could be just a loose screw, or a missing spring.
If this non-canceling has been going on "forever", or you recently had some work done for front end alignment, then write back for info about the steering column clip/cam, and how to center it. (Too long to add here).

Dick


-----Original Message-----
From: Douglas Morris
Sent: Tuesday, August 17, 2010 10:59 AM
To: 6pack
Subject: [6pack] Turn Signal Switch - Return Function

Is the turn-signal switch return thingie repairable or adjustable?
After a left (or is it right?) turn, the switch does not automatically trigger
off.
I'm hoping this is a pliers-fixable issue.
Anybody? Beuller?

Doug Morris, NC
_______________________________________________

6pack at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/6pack/tr6taylor@webtv.net