[6pack] steering wheel

[Navarrette, Vance]

 	Oliver:

	Get some flexible body filler from your auto parts store, used for repairing
plastic bumpers on cars.

	If the grip is loose on the rim, you can punch holes in the loose rubber on
the back of the wheel, and squirt weather stripping adhesive into the holes to
glue the grip to the steel ring. Use lots of pressure to force the glue around
inside the rubber.
	Use a sharp blade and enlarge the crack by cutting a groove in the rubber
about 3/16 wide or so. Fill the groove with the body filler, following the
contours of the wheel as closely as possible. Allow it to set, and then sand
the repair to the final shape, smoothing it into the wheel surface.
	Lastly, mask the wheel spokes and give it several coats of flexible vinyl
dash paint (also from the auto parts store), allowing the wheel to dry between
coats.
	Your wheel will look and feel literally brand new, like a buttery leather.
Very satisfying restoration and the dash paint is very durable with just the
right sheen.

	Much better than paying $330 for a NOS wheel, which is what the last one went
for on eBay.

	Vance

    Vance Navarrette
    Knowledge is power.
    Power corrupts.
    Study hard, be evil.
    http://www.triumphowners.com/832

-----Original Message-----
From: 6pack-bounces at autox.team.net [mailto:6pack-bounces at autox.team.net] On
Behalf Of oliver


	The steering wheel on our 72, which might be original (who knows!) is the
rubber over metal.  there is about a 3" crack in the rubber.  is there a way
I
can patch that without replacing the whole wheel?  is there a way of
replacing
all the rubber at once?  (please don't tell me to get one of those covers you
tie with lanyard . . .)