[6pack] Effects of blocking bypass

[Navarrette, Vance]

	Bob:

	Nice little article, and spot on best I can tell.

	The article fails to mention how difficult it is to access the adjuster screw
on the rear carb. It is between the carbs and requires a screw driver of no
more than 2 inches in length.
	I used a short finishing nail and filed a flat blade on the tip. I keep it in
the tool chest in case I need to adjust the valves. Fortunately, once set up
they seem to never need any fiddling.

	Vance


      Vance Navarrette
    Cogito Ergo Zoom
    I think, therefore I go fast

-----Original Message-----
From: 6pack-bounces at autox.team.net [mailto:6pack-bounces at autox.team.net] On
Behalf Of Bob
Sent: Wednesday, September 09, 2009 11:22 AM
To: Couzelis,William M.; 6pack at autox.team.net
Subject: Re: [6pack] Effects of blocking bypass

This is the VTR article I found bypass valves, see second paragraph.
http://www.vtr.org/maintain/zs-tech-tips.shtml
Bob